How to login and modify Netgear Router Configuration

In this Netgear router login guide, we show you how to log in to your router and the options you need to adjust to ensure you get the fastest and safest possible wireless Internet speeds.
Maybe you bought your Netgear router, set it up and have had no reason to return to the router configuration or configuration menus since then. And now you need to change again to change something, you may have kept the same broadband provider for a long time and finally decided to switch to a better business, but you have completely forgotten how to log in to the Netgear device.

Primary Netgear router login method

First, you must open your favorite web browser (no matter what browser, anyone will do it well). Then simply type the following in the address bar (URL) of your browser and press Enter: http://www.routerlogin.net

Alternatively, you can also write: http://www.routerlogin.com

You should then see the login window of the router, which asks for your username and password. If so, go to step 3. If the router login window does not appear, continue with step 2, which is an alternative method of login.

Alternative login method of the Netgear router (over IP)

Alternatively, you can enter the IP address of your Netgear router in the browser’s URL bar.

The IP address is a four-digit number, with dots between each number, and you may think it is a digital address that shows where your router is located on the local network. Usually, it will be something like 192.168.xxx.xxx where those last two numbers (xxx) may differ slightly.

Sign in to 192.168.1.1 Gateway – 192.168.l.l Login Manual

This IP address may be written in the instruction booklet of your router somewhere, but if not, you can easily find it using your PC.

In Windows 10, go to the search box (right next to the Start button), type ‘C’, and suggestions that start with the letter ‘C’ will appear above: click on Command Prompt. (In earlier versions of Windows, click Start, click the search field, or the magnifying glass icon, type CMD and click Command Prompt).

A window will appear: simply type the following into that window (known as the command line) and press Enter: ipconfig

A series of numbers will appear below. Make a note of the one labeled as Default Gateway (usually found at the bottom).

Simply type this number exactly as it is written (including the dots between the numbers) in the address bar of your browser, and it will be in golden color.

Enter user credentials

In the login window of the Netgear router, which asks for your username and password, enter your credentials, then click on ‘Login’, and that’s it. You are already logged in to your Netgear router.

You can now go to the (optional) section at the end of this article on the common settings to take a look once you are inside the Netgear router menus.

There is a possible obstacle here, and that is if you forgot your username or password. You modified them from the default values, right, or at least the password?

Any Router : Default Username and Passwords

Those default values ​​are username ‘admin’ and the password is ‘password’ (these default values ​​are written at the bottom of your router somewhere), but since they are so insecure (and known to anyone), you should always change them.

However, if you are not sure what your password details are, you can also try these default values ​​just in case. Just make sure to change them later. If it fails, you must perform a password recovery.

Password recovery

In the login window of the Netgear router requesting your username and password, click Cancel. Now, if you have previously enabled password recovery, the Router Password Recovery screen will appear.

You must complete the serial number of your router (written somewhere on the device, probably at the bottom) and answer some security questions. Once this is done, the password will be displayed for you to see.

If you did not enable password recovery, or if you forgot the answers to security questions, we fear you are not lucky. You should simply start from scratch by performing a factory reset on your Netgear router, which will reset the username and password to the default values ​​(as explained above).

To perform a factory reset, make sure that the router is turned on and then look for the reset button (it is almost certain that it is on the back of the device). This is a small hole in which you have to insert a paper clip and press it for seven seconds (maybe a few more just in case).

The router will restart, but keep in mind that you have lost all your settings (you must configure the device again from scratch).

Netgear router login through the mobile application

Install the Netgear application

Locate the Nighthawk application (which has replaced the old Genie application, so you should get rid of it and update it if you already ran Genie) in the Apple App Store or Google Play.

Download it and install it on your phone or tablet. Once installed, run the application and accept the terms and conditions. You must also decide whether to allow the application to access the location services of your device (which allows the application to automatically connect your phone to your network if you change the name of the network).

Orbi router owners must use the Orbi application, of course, which is used when configuring the mesh network system for the first time.

Login or create a Netgear account

The next step is to log into your Netgear account: if you already have an account, press the ‘Log in’ button, enter your email address and password, then press ‘Log in’.

Otherwise, press ‘Create account’ and provide the appropriate details (name, email, password).

You will then be asked if you need to install a new router; Unless you are configuring your router for the first time, you must select ‘No’.

Log in to the router

You will now be asked to log in with your administrator credentials for the router. As is the case when logging in from a PC, you will need the username and password of your router (not your Netgear account, which is something completely separate). Enter these details and press Sign in, and that’s it: you are signed in to your Netgear router.

If you have forgotten your password, there is a link presented in a Netgear support article that explains what to do next, but you can also see the help tips in steps 3 and 4 of the instructions above to log in to your Netgear router from a PC, since you will be following the same procedure.

Common settings

Well, then you have successfully logged into your Netgear router and you have solved what you need to order. While you are here, it might be useful to outline some commonly used options that you can see and potentially modify (we also have some useful tips on why it might be useful to do so too).

Here, we are using a Nighthawk XR700 router running DumaOS, and although the interface for your particular Netgear router model may seem different, the main options must be the same or very similar, in general terms.

If you are logged in to your router from the Nighthawk smartphone application, the user interface will be very different, but the configuration uses the same (or similar) names. However, keep in mind that there is an exception where you cannot access QoS from the mobile application.

Device administrator

This can also be called Connected Devices and shows a visual illustration (or a simple list) of all the devices connected to your router and home network. It can be interesting to see exactly how many devices your family uses, but perhaps most importantly, it could also detect devices that should not be connected to your network. If you click on any particular device, there is an option to block it, if necessary.

QoS

QoS means Quality of service, and this allows you to prioritize different devices in terms of the bandwidth (download or upload) they get. For example, if you want your console to work better, for example, by downloading a large game, or perhaps online games, simply give this device a greater part of the bandwidth.

In DumaOS, you can simply click and drag any of the percentage numbers for any device out to give you proportionally more bandwidth (or even 100% of bandwidth). However, remember that what you are giving to a particular device is taking away from others. By default, everything is balanced equally between each piece of hardware, and you can click Reset Distribution to return to this default image.

Guest Network

As the name implies, this is a secondary network that you can configure on your router that the people you visit can use, without having to let them get lost in your main home network. Another potential application is that you could use the guest network for your smart home devices, which generally have less stringent security levels than other hardware, so if they are affected by potential vulnerabilities, you can keep them away from your PCs and Other critical devices. Devices in your main network.

To configure it, simply go to Guest Network (Guest Wi-Fi in the smartphone application) through the main menu (although in DumaOS, you will find this option in Settings> Settings> Guest network). Simply click on Enable the guest network to do that (which can be a 2.5GHz or 5GHz Wi-Fi network), change the network name if you wish and choose WPA2 [AES] for security (or the option to WPA2 present).